How to use
SHINE can be added to the intended paint, coating, ink or paste in a specific weight ratio defined by the customer to obtain tailored results in a final product composition.
Please check your colour system if you need the water based or the solvent based version of SHINE. Standard in our product portfolio is the water based version. If you need a solvent based version for you project please contact us: shop@jos-ef.com
Intended Use
SHINE is suitable to add a dynamic light effect to existing paints, coatings, pastes and inks.
Health and Safety Information
See latest version of Safety Data Sheet (SDS) in our Download section of the website.
Viscosity
The SHINE product has liquid-like properties with low viscosity. The viscosity of the new crystal glass composition can be adjusted by either diluting using a relevant thinner according to your colour system.
Tunability Options of Visual Effects
SHINE is used to create a dynamic light effect and, depending on customer’s requirements, the visual effect can be optimized by adding additional combinations of metallics or pearlescent pigments.
SHINE and additional pigments will also have an influence to the appearence of your colours.
The final product composition must be determined by the customer depending on desired SHINE Effect strength, color intensity, visual effects, and viscosity characteristics. It is recommended to test SHINE products as to their suitability for customer’s envisaged purpose prior to use.
Special Instructions
Operating temperatures 5 – 25 °C
Before use, homogenize the SHINE mechanically by stirring without introducing any air bubbles. Depending on the colour type you use the stirring time should be at least some minutes.
Both SHINE and final product composition may display some sedimentation or separation, requiring the product to be mechanically stirred or shaken before use and before measurement of relevant properties.
For spray paints: In operation during spraying use filters (100µm recommended)
Cleaning
It is recommended to use warm water to remove contamination if spilled. Easily cleanable from most surfaces. Removable from non-porous surfaces.
Storage
Shelf-Life 2 years
Storage temperature 5 – 25 °C
Protect against frost and heat.
Prolonged storage at high temperature (> 35 °C) accelerates product aging.
Do not freeze.
Compliance Management
This product is manufactured under the relevant Good Manufacturing Practices (GMP) and according to the information in this Technical Data Sheet. The user has the responsibility to ensure that the finished product is suited for its intended use.
